NATURAL GAS PRESSURE REGULATOR

Model NW-PL is a pressure-loaded, flow-to-open, direct-action,
loading-type pilot regulator. Used in gaseous service only for pressure
reducing or backpressure applications. Pressure-loading design
increases sensitivity by eliminating the resultant “droop effect” range
spring. May be loaded with process or auxiliary gas. A Type MA6 with
1:1 loading-to-output ratio is standard; an alternate Type MD6 with 1:3
ratio is available for higher outlet pressures with lower auxiliary
loading pressures, and a high sensitivity Type MA7 with 1:1 ratio is
available for close accuracy of setpoint at lower outlet pressures.

The Model 1465 is for small flows and is used primarily when sampling a
fluid for analytical purposes. The 316 SST body can handle inlet
pressures as high as 5000 psig 344 Barg). Designed to control a wide
range of fluids, Model 1465 can be used as a natural gas pressure
regulator, inert gas pressure regulator, sour gas pressure regulator,
steam regulator, chemicals regulator and water pressure regulator. Used
to reduce pressure for analytical sampling.

The “DO-ALL” concept Cashco's Model DA6 allows application of all types
of clean fluids. Designed primarily as a gaseous service valve, can be
applied in liquid service applications where excessive cavitation or
flashing is absent. Excellent for atmospheric industrial gases – GN2,
GOX, Ar, He, H2, CO2 – as well as a natural gas pressure regulator.
Used as a utilities – air, oil, water, steam – regulator. Corrosive and
noncorrosive chemical services – gas or liquid – are possible with
broad materials range. Special variations available for cryogenic gas
or liquid service.